Thank you for purchasing our window security stickers from our ONLINE SHOP.
Our VINYL window stickers and can be simply removed from their backing sheet and fixed internally on any clean, dust free glass window for "DRY" installation.
For best results however, we recommend "WET" installation (See below).
1. PEEL AWAY BACKING
Clean the window you want to apply the sticker to with a damp cloth. Ensure the area is free of dirt, grease or dust. When ready peel sticker from its backing
2. APPLY CLEAN WATER
Either spray the sticker with lots of clean water or simply dip into a bowl of clean water. Soak sticker well !
3. PLACE & ADJUST
Position the wet sticker in required location. The water will allow leveling and re-positioning of the sticker
4. REMOVE AIR & WATER
Use a bank card to push out any excess water or air bubbles behind the sticker. Be careful not to press too hard and damage the sticker
5. ALLOW TO DRY
Leave to DRY for a 3-5 hours. If fitted to a vehicle window that OPENS, do NOT operate the window during this time.